lemon-mirror:
Home >> Cadillac >> 1996 >> Seville SLS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Transmitter Programming >> Digital Instrument Cluster

Digital Instrument Cluster

  1. Press OFF and WARM buttons on climate control panel simultaneously. Instrument Panel Cluster (IPC) will light all telltales, go blank, then enter DIAGNOSTIC MODE. Press FAN DOWN button to scroll through system until "RFA?" is displayed, then press FAN UP button. Press FAN DOWN button until "RFA OVERRIDE" is displayed, then press FAN UP button. When "NO OVRD RF S00" is displayed, press FAN UP button.
  2. When "PGM Fobl S01" is displayed, press WARM button and "99" will be displayed in left upper corner of IPC, just below odometer. System is now ready to program transmitter.
  3. Press and hold TRUNK button on transmitter. While holding TRUNK button, press LOCK button and hold for one second. Hold both buttons for a total of 3 seconds. Locks will cycle when programming is complete. If transmitter is not programmed within 30 seconds after entering "99" override display, system will default and you must begin again at step 2).
  4. To program second transmitter, press FAN UP button until "PGM FOB2 S02" is displayed, then follow steps 2) and 3) to program transmitter. To exit system, press RECIRC or RESET buttons.
· About lemon-mirror