Symptom Tests: Notes
NOTE:
If area of fault cannot be located by performing the following tests, problem may be intermittent. Check for poor connections, rubbed through wire insulation or broken wire inside its insulation. Inspect harness connectors for backed out terminals, improper mating, broken locks, improperly formed or damaged terminals, poor terminal-to-wire connections, and damaged harnesses. If connections and harnesses are okay, observe scan tool while wiggling related connectors and wire harnesses. A change in display will indicate location of fault.
SYMPTOM INDEX
| Symptom | Perform Test |
|---|---|
| CTD Alarm Mode Inoperative | 1 |
| CTD Enters Alarm Modes Intermittently | 2 |
| Horn Inoperative In CTD Alarm Mode | 3 |
| Lights Inoperative In CTD Alarm Mode | 4 |
| SECURITY Indicator Light Always On Or Flashing | 5 |
| SECURITY Indicator Light Inoperative | 6 |
| SECURITY Indicator Light On, Engine Does Not Crank | 7 |