Adding Keys
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
J 35628-A Vats/Pass Interrogator Tester. See Special Tools and Equipment .
- In order to copy a PASS-Key® II ignition key, determine the necessary key code or resistance value.
- Determine the master ignition key code using the J 35628-A
as outlined in the following procedure:
- Turn ON the J 35628-A . See Special Tools and Equipment .
- Insert the key into the tool lock cylinder.
- Note the measured key code of the master ignition key as displayed on the key code reader.
- Obtain a key blank matching the key code.
- Cut the key blank to match the original key.
IMPORTANT: Disconnect the tool wiring connectors.
IMPORTANT:
When servicing the PASS-Key® II system, obtain all the vehicle ignition keys. Verify the key code values with the J 35628-A
. See Special Tools and Equipment .