lemon-mirror:
Home >> Cadillac >> 2001 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Module, Mounting Fasteners & Bracket
    GM68629Courtesy of GENERAL MOTORS CORP.
  1. Install the I/P module (1) to the bracket (2).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the I/P module mounting fasteners (3).

    Tighten:  Tighten the fasteners to 10 N.m (89 lb in).

    3. Fig 2: I/P Module & Pigtail Connector
    GM68630Courtesy of GENERAL MOTORS CORP.
  3. Connect the pigtail connector to the I/P module.
    4. Fig 3: Inflatable Restraint Instrument Panel Module
    GM68627Courtesy of GENERAL MOTORS CORP.
  4. Install the CPA to the harness connector on the I/P module.
  5. Install the I/P upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
  6. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .
· About lemon-mirror