lemon-mirror:
Home >> Cadillac >> 2001 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Instrument Panel (I/P) Module Disable Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: CPA, Wiring Harness Connector, Passenger Compartment Door & Inflatable Restraint IP Module Switch
    GM629632Courtesy of GENERAL MOTORS CORP.
  1. Connect the wiring harness connector (3) to the inflatable restraint IP module switch (4) connector.
  2. Install the CPA (2) on the wiring harness connector (3).
  3. Insert the inflatable restraint IP module switch (4) into the switch mounting in the instrument panel (IP) compartment door (1) and snap into place.
  4. Close the instrument panel (IP) passenger compartment door (1).
· About lemon-mirror