Section 1082 (Engine Cooling System): Specifications
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Automatic Transmission Oil Cooler Line Fitting | 25 N.m | 18 lb ft |
| Coolant Air Bleed Bolt/Stud | 12 N.m | 106 lb in |
| Cooling Fan Motor Bolt | 6 N.m | 53 lb in |
| Engine Coolant Heater | 40 N.m | 30 lb ft |
| Engine Coolant Heater Cord Clip Bolt | 32 N.m | 24 lb ft |
| Fan Blade Nut | 6 N.m | 53 lb in |
| Radiator Baffle Bolt | 10 N.m | 89 lb in |
| Radiator Support Bolt | 8 N.m | 71 lb in |
| Radiator Surge Tank Nut | 10 N.m | 89 lb in |
| Stabilizer Shaft Bracket Bolt | 58 N.m | 43 lb ft |
| Water Pump Bolt (First Pass) | 15 N.m | 11 lb ft |
| Water Pump Bolt (Final Pass) | 30 N.m | 22 lb ft |
| Water Pump Inlet | 15 N.m | 11 lb ft |