Disc Brake Component Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Front Brakes JC3/JC4
Rotor Discard Thickness	27.50 mm	1.083 in
Rotor Minimum Allowable Thickness After Refinish	28.0 mm	1.102 in
Rotor Thickness (new)	29.0 mm	1.142 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Front Brakes JH2
Rotor Discard Thickness	27.50 mm	1.083 in
Rotor Minimum Allowable Thickness After Refinish	28.0 mm	1.102 in
Rotor Thickness (new)	29.0 mm	1.142 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Front Brakes JH6
Rotor Discard Thickness	36.50 mm	1.437 in
Rotor Minimum Allowable Thickness After Refinish	37.0 mm	1.457 in
Rotor Thickness (new)	38.0 mm	1.496 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rear Brakes JC4
Rotor Discard Thickness	28.5 mm	1.122 in
Rotor Minimum Allowable Thickness After Refinish	29.0 mm	1.142 in
Rotor Thickness (new)	30.0 mm	1.181 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rear Brakes JH2
Rotor Discard Thickness	28.5 mm	1.122 in
Rotor Minimum Allowable Thickness After Refinish	29.0 mm	1.142 in
Rotor Thickness (new)	30.0 mm	1.181 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rear Brakes JH6
Rotor Discard Thickness	27.5 mm	1.083 in
Rotor Minimum Allowable Thickness After Refinish	28.0 mm	1.102 in
Rotor Thickness (new)	29.0 mm	1.142 in
Rotor Maximum Allowable Lateral Runout	0.13 mm	0.005 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.