lemon-mirror:
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Spring Bumper Replacement >> Installation Procedure

Installation Procedure

  1. Snap the jounce bumper to the mounting cup (4WD 15 Series).
    Fig 1: Snapping Jounce Bumper From Mounting Cup
    G01455463Courtesy of GENERAL MOTORS CORP.
  2. Install the jounce bumper (All 25/35 Series and RWD 15 Series with coil spring).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the nut to the jounce bumper stud.

    Tighten 

    Tighten the nut to 30 N.m (22 lb ft).

  4. Remove the safety stands.
  5. Lower the vehicle.
    Fig 2: Installing Nut To Jounce Bumper Stud
    G01455464Courtesy of GENERAL MOTORS CORP.
· About lemon-mirror