lemon-mirror:
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 4.6L - Introduction >> Repair Instructions >> Knock Sensor (KS) Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Knock Sensor (KS)
    GM602292Courtesy of GENERAL MOTORS CORP.
  1. Install the knock sensor.

    Tighten:  Tighten the knock sensor to 25 N.m (18 lb ft).

  2. Connect the knock sensor electrical connector.
  3. Reinstall the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical.
· About lemon-mirror