lemon-mirror:
Home >> Cadillac >> 2005 >> DeVille Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: IAC Valve and TP Sensor Component View
    GM574138Courtesy of GENERAL MOTORS CORP.
  1. Remove the idle air control (IAC) electrical connector (1) from the IAC sensor (4).
  2. Remove the manifold absolute pressure (MAP) sensor electrical connector from the MAP sensor.
  3. Remove the water pump belt cover.
  4. Remove the TP sensor retaining screws electrical connector (2) from the TP sensor (3).
  5. Remove the TP sensor electrical connector (2) from the TP sensor (3).
· About lemon-mirror