Approximate Fluid Capacities

The following approximate capacities are given in English and metric conversions. See Fluid and Lubricant Recommendations for more information. All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid level after filling.

Application	Specification
Application	Metric	English
Cooling System
3.6L (LY7)	11.1 liters	11 quarts
4.4L (LC3)	13.4 liters	12.7 quarts
4.6L (LH2)	11.8 liters	12.5 quarts
Intercooler System
4.4L (LC3)	2.5 liters	2.6 quarts
Engine Oil With Filter
3.6L (LY7)	5.7 liters	6 quarts
4.4L (LC3)	8.5 liters	9 quarts
4.6L (LH2)	7.6 liters	8 quarts
Fuel Tank	66.2 liters	17.4 gallons
Transmission/Transaxle
Automatic 5L40-E/5L50-E Bottom Pan Removal	6 liters	7.4 quarts
Automatic 5L40-E/5L50-E Overhaul	9 liters	9.5 quarts
Automatic 6L80-E Bottom Pan Removal	6.2 liters	6.5 quarts
Automatic 6L80-E Overhaul	9.5 liters	10 quarts
Front Axle	0.7 liters	1.37 quarts
Rear Differential Driveline/Axle - Locking/Limited Slip
Drain and Fill With Cover Removed	1.2 liters	1.27 quarts
Drain and Fill With Use of Drain Plug	1.0 liters	1.06 quarts
Limited Slip Additive Drain and Fill With Cover Removed*	100 ml	3.38 oz
Limited Slip Additive Drain and Fill With Use of Drain Plug*	70 ml	2.37 oz
Transfer Case BW 4476179	500 ml	0.53 quarts
*The limited slip additive container capacity is greater than the amount needed. Only add the specified amount.