lemon-mirror:
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Data Communication System) >> Repair Instructions >> Rear Body Control Module Replacement (Export) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of RIM
    GM1210870Courtesy of GENERAL MOTORS CORP.
  1. Install the module to the mounting bracket.
    2. Fig 2: View Of RIM Electrical Connectors
    GM1210878Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors (1).
  3. Install the right rear body side trim. Refer to Body Side Rear Trim Panel Replacement (w/TB5) or Body Side Rear Trim Panel Replacement (w/o TB5) .
  4. Reprogram the module. Refer to Control Module References .
· About lemon-mirror