lemon-mirror:
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Towing Systems >> Trailer Brake Control System >> Repair Instructions >> Trailer Brake Control Module Replacement (2500) >> Removal Procedure

Removal Procedure

  1. Turn the ignition switch to the OFF position.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    3. Fig 1: Trailer Brake Control Module & Mounting Bolts
    GM2154128Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the trailer brake control module electrical connector.
    4. NOTE:

    It is not necessary to completely remove the bolts.

  4. Loosen, but do not remove, the trailer brake control module bolts (1).
    5. Fig 2: Trailer Brake Control Module
    GM2154131Courtesy of GENERAL MOTORS COMPANY
  5. Slide the trailer brake control module (1) rearward and remove the trailer brake control module.
· About lemon-mirror