lemon-mirror:
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1210 (Hybrid Engine Electrical System) >> Repair Instructions >> Generator Control Module Ground Strap Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Motor Generator Control Module Ground Strap & Bolt
    GM1968778Courtesy of GENERAL MOTORS CORP.
  1. Position the ground strap (2) to the drive motor generator control module.
    2. NOTE: Refer to Fastener Notice .
  2. Install the ground strap bolt (1).

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

  3. Install the air cleaner assembly. Refer to Upper Intake Manifold Cover Replacement .
· About lemon-mirror