lemon-mirror:
Home >> Cadillac >> 2017 >> CTS V >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Fluid Irritant Warning .

CAUTION:

Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

  1. Turn the ignition OFF.
    2. Fig 1: Windshield Washer Solvent Container Filler Tube
    GM3425143Courtesy of GENERAL MOTORS COMPANY
  2. Remove the windshield washer solvent container filler tube (1). Windshield Washer Solvent Container Filler Tube Replacement
  3. Thoroughly clean the electronic brake control module (EBCM) to brake pressure modulator valve (BPMV) area of any accumulated dirt and debris.
  4. Disconnect the EBCM electrical connector.
    5. Fig 2: EBCM Bolts
    GM3425144Courtesy of GENERAL MOTORS COMPANY
  5. Remove the EBCM bolts (1).
    6. Fig 3: EBCM
    GM3425145Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not pry the components apart.

  6. Remove the EBCM (1) from the BPMV.
  7. Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
· About lemon-mirror