lemon-mirror:
Home >> Cadillac >> 2017 >> XT5 Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Inflatable Restraint Sensing and Diagnostic Module Programming and Setup >> Replace and Program Control Module or Reprogram Control Module

Replace and Program Control Module or Reprogram Control Module

To program a replacement control module, perform the following procedure:

If "K36 Inflatable Restraint Sensing and Diagnostic Module - Programming and Setup" is shown

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K36 Inflatable Restraint Sensing and Diagnostic Module - Programming and Setup and follow the on-screen instructions.
  3. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.

If "K36 Inflatable Restraint Sensing and Diagnostic Module - Programming and Setup" is not shown

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K36 Inflatable Restraint Sensing and Diagnostic Module - Programming and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K36 Inflatable Restraint Sensing and Diagnostic Module - Setup and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
· About lemon-mirror