lemon-mirror:
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System (Hybrid) >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure

Installation Procedure

  1. GM4565592Courtesy of GENERAL MOTORS COMPANY

    Electronic Brake Control Module (1) - Install

  2. GM4565591Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Electronic Brake Control Module Bolt (1) - Install and tighten 3 N.m (27 lb in) [4x]

  3. GM4476865Courtesy of GENERAL MOTORS COMPANY

    Brake Pressure Modulator Valve Primary Brake Pipe Fitting (1) - Install and tighten 32 N.m (24 lb ft)

  4. Connect the EBCM electrical connector.
  5. Bleed the brake system. Antilock Brake System Automated Bleed
  6. GM4244635Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner (2) - Install - Front Wheelhouse Liner Replacement

  7. Engine Wiring Harness Fuse Block Bracket - Install - Engine Wiring Harness Fuse Block Bracket Replacement
  8. Program the EBCM. Control Module References
  9. Center the steering angle sensor. Steering Wheel Angle Sensor Centering (without UKL)Steering Wheel Angle Sensor Centering (with UKL)
· About lemon-mirror