Replace and Program Control Module or Reprogram Control Module

To program a replacement or an existing control module, perform the following procedure:

1. Install the EL-49642  SPS Programming Support Tool.
2. Access the Service Programming System (SPS) and follow the on-screen instructions.
3. On the SPS Supported Controllers screen, select K31 Navigation Control Module - Programming (Korea only) and follow the on-screen instructions.
4. At the end of programming, choose the "Clear DTCs" function on the SPS screen.
5. Verify the following operates correctly:
   • Map operation after inserting the SD Card
   • GPS operation
   • Destination search function