Installation Procedure

Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.

Fig 1: EBCM And Brake Pressure Modulator Valve (BPMV)
Courtesy of GENERAL MOTORS COMPANY
Inspect the EBCM to BPMV gasket for damage and replace, if necessary.
Install the EBCM (1) to the BPMV.
Install the EBCM bolts (1) and tighten in a cross pattern to 3 N.m (27 lb in).

Fig 2: EBCM Bolts
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution

NOTE: A new EBCM may not have threaded inserts. Refer to the Electronic Parts Catalog and use new self tapping fasteners to form the threads.
Connect the EBCM electrical connector.
Program the EBCM. Refer to Control Module References