Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed plastic trim tool, release the retaining clips.
Front Floor Console Rear Trim Plate (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove
Front Floor Console Extension Bolt (2) - Remove
Using a flat bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Left Side (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Cover Bolt (1) - Remove [3x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Using a flat bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Cover Bolt (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed plastic trim tool, release the retaining clips.
Reposition the right and left front floor console upper panel (1) enough to clear the edges of the front floor console rear trim lower panel closeout (2).
Front Floor Console Rear Trim Lower Panel Closeout (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Reposition the component to access the electrical connectors.
Disconnect the electrical connectors.
Front Floor Console Rear Trim Lower Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Accessory AC and DC Power Control Module Nut (1) - Remove [3x]
DC/AC Converter Control Module (2) - Remove