lemon-mirror:
Home >> Chevrolet >> 1976 >> Chevette Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Cruise Control >> Adjustments >> Transducer

Cruise Control: Adjustments: Transducer

  1. Before any adjustment is made to transducer, inspect all vacuum hoses for damage. All hoses should be properly connected, not kinked or pinched, and no leaks should be detected. Check, and if necessary, adjust electric and vacuum brake release switches (as previously outlined). Check, and if necessary, adjust servo bead chain (as previously outlined).
  2. If cruising speed is lower than the engaged speed, loosen the orifice tube locknut and turn the tube outward. If cruising speed is higher than engagement speed, turn orifice tube inward. Each 1/4" turn will alter engagement cruising speed 1 MPH. Tighten the adjustment locknut and check system operation at 60MPH.
· About lemon-mirror