Fuel System Pressure Relief
- On 2.8L and 4.3L engine, fuel pressure is relieved and drops to zero when ignition is turned off. On 2.5L engine, remove "FUEL PUMP" fuse from fuse block.
- Crank engine. Engine will start and run until fuel supply remaining in fuel lines is used. Engage starter for about 3 seconds to remove any remaining fuel. With ignition off, replace fuse.
WARNING:
To minimize the risk of fire and personal injury when relieving pressure in fuel system, cover area to be disconnected with a shop rag. After use, place rag in approved container.