lemon-mirror:
Home >> Chevrolet >> 1986 >> Spectrum 2D Hatchback, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Testing >> Solenoid Tests >> Hold-In Coil Test

Hold-In Coil Test

  1. Connect a jumper wire between "M" (MT) terminal and solenoid case. Apply 8 volts to "S" terminal to pull in plunger. See Fig 1 . Disconnect lead to "M" (MT) terminal.
    Fig 1: Connections for Conducting Solenoid Hold-In Test (Make tests in less than 10 seconds to avoid solenoid damage.)
    G29415
  2. If pinion remains out (plunger is pulled-in), hold-in coil is good. If not, replace magnetic switch.
· About lemon-mirror