EGR System
- Connect a tachometer to engine. Disconnect vacuum hose 3-way connector from canister. Connect a vacuum gauge to 3-way connector between EGR valve and TVV. With engine cold, start engine and check that vacuum gauge indicates no vacuum at idle.
- Warm engine to operating temperature. Check that vacuum gauge indicates no vacuum at idle. Increase engine speed to 3500 RPM. Vacuum gauge should indicate over 2 in Hg vacuum. Disconnect and plug vacuum hose to EGR valve.
- Engine speed should increase. Stop engine, push diaphragm plate by hand and release it. Check that diaphragm plate returns smoothly to original position.
CAUTION:
If valve is hot, it may be necessary to wear gloves to avoid burning fingers.