lemon-mirror:
Home >> Chevrolet >> 1992 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Test 1

Test 1

  1. Disconnect LH window switch connector. Connect test light between terminal "G" of connector and ground. See WIRING DIAGRAMS  . Turn ignition to RUN. If test light lights, go to next step. If test light does not light, check for open or short in Pink wire between switch connector and power window circuit breaker, and check for open in power window circuit breaker.
  2. Measure voltage between master switch connector terminal "G" (positive) and connector terminal "F" (negative). If battery voltage is present, replace LH window switch. If battery voltage is not present, repair open in Black wire between master switch connector terminal "F" and ground. See WIRING DIAGRAMS  .
· About lemon-mirror