Ignition Timing
- Set parking brake. Block drive wheels. Place transmission in Neutral or Park. Warm engine to operating temperature. Turn A/C off (if equipped). Ensure Malfunction Indicator Light (MIL) is not on.
- Disconnect Electronic Spark Timing (EST) by-pass connector (Tan/Black wire) which is located near distributor or in cab behind glove box. DO NOT disconnect 4-wire connector at distributor.
- Connect timing light to No. 1 spark plug wire. Check timing and adjust if necessary. See IGNITION TIMING . Reconnect EST by-pass connector. Clear DTC.
IGNITION TIMING (DEGREES BTDC @ RPM)
| Application | Man. Trans. | Auto. Trans. |
|---|---|---|
| 5.7L (VIN K) | 0 @ Idle | 0 @ Idle |