TP Sensor Learn

If a NEW TP sensor or throttle body is installed, EBTCM must learn new TP sensor idle position voltage. This procedure is necessary to ensure effective engine torque reduction during Acceleration Restraint System (ASR) operations. TP sensor learn procedure requires a Tech 1 scan tester.

Turn ignition off. Connect Tech 1 scan tester with a Mass Storage cartridge. Turn ignition on. Select ABS/ASR feature from menu.
Select F5 (TP SENSR LRN). Press up arrow to begin learn procedure. Wait for Tech 1 scan tester to indicate COMPLETE. Turn ignition off. Disconnect Tech 1 scan tester.

NOTE: Ensure accelerator and brake pedals are free from any obstructions while performing TP sensor learn procedure. PCM will not perform learn function with accelerator pedal or brake pedal obstructions.

TP SENSOR ADJUSTMENT VOLTAGE

Application

⁽¹⁾ Volts

5.7L

⁽²⁾ .60-4.0

⁽¹⁾	Voltage range is from idle position to wide open throttle position.

⁽²⁾	TP sensor is not adjustable.