lemon-mirror:
Home >> Chevrolet >> 1997 >> Venture LS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Programming >> Remote Activation Verification Customization

Remote Activation Verification Customization

  1. If ignition is turned off or drivers' door is opened while Body Control Module (BCM) is in any customization mode, customization procedure will end and BCM will remain in most recent mode.
  2. Remove BCM PRGRM fuse located in instrument panel fuse block. Close all vehicle doors and liftgate. Turn ignition to ACC position. Seat belt warning light flashes and chime sounds 1-4 times to indicate BCM is in feature customization mode.
  3. Press transmitter LOCK button. Seat belt warning light will flash and chime will sound 1-2 times to indicate which remote unlock control mode BCM is in. Each time transmitter LOCK button is pressed, mode number will advance. After mode 4, mode 1 will repeat.
  4. See REMOTE ACTIVATION VERIFICATION CUSTOMIZATION  . To exit and save current customization, turn ignition off and replace BCM PRGRM fuse.
REMOTE ACTIVATION VERIFICATION CUSTOMIZATION

Mode Remote Unlock Verification Remote Unlock Verification
1 Disabled Disabled
2 Park Lights Only Park Lights Only
3 Park Lights Only Horn & Park Lights
4 Park Lights Only (1) Horn Only
4 Park Lights Only (2) Horn & Park Lights
(1) First press of transmitter LOCK button.
(2) Second press of transmitter LOCK button.
· About lemon-mirror