One Power Mirror Inoperative
- If left mirror is inoperative, go to next step. If right mirror is inoperative, go to step 7).
- Disconnect left power mirror connector. Connect test light between left power mirror harness connector terminal "B" (Light Green wire) and ground. Using mirror select switch, select left mirror. Move power mirror switch left. If test light illuminates, go to next step. If test light does not illuminate, go to step 4).
- Replace power mirror pack in left power mirror. See REMOVAL & INSTALLATION . Recheck system operation.
- Check for poor connection or open in Light Green wire between left power mirror and power mirror switch. If circuit is not okay, go to next step. If circuit is okay, go to step 6).
- Repair poor connection or open in Light Green wire between left power mirror and power mirror switch. Recheck system operation.
- Replace power mirror switch. Recheck system operation.
- Disconnect right power mirror connector. Connect test light between right power mirror harness connector terminal "B" (Light Blue/White wire) and ground. Using mirror select switch, select right mirror. Move power mirror switch left. If test light illuminates, go to next step. If test light does not illuminate, go to step 9).
- Replace power mirror pack in right power mirror. See REMOVAL & INSTALLATION . Recheck system operation.
- Check for poor connection or open in Light Blue/White wire between right power mirror and power mirror switch. If circuit is not okay, go to next step. If circuit is okay, go to step 6).
- Repair poor connection or open in Light Blue/White wire between right power mirror and power mirror switch. Recheck system operation.