Testing - Diagnostic: Notes
NOTE:
To prevent damage to terminal, connector Test Adaptor Kit (J 35616-A) must be used whenever a diagnostic procedure requires checking or probing a terminal. To locate and identify terminals, see WIRING DIAGRAMS
.
NOTE:
During system repairs, if Body Control Module (BCM) needs to be replaced, make sure correct BCM is installed in vehicle for proper operation of options. See BCM IDENTIFICATION
table.
BCM IDENTIFICATION
| BCM Type | Options |
|---|---|
| 2 | Without Keyless Entry |
| 3 | With Keyless Entry |
| 4 | With Keyless Entry & Content Theft Deterrent |
SYMPTOM DIAGNOSIS
| Symptom | Go To Test No. | ||||
|---|---|---|---|---|---|
| Lock, Unlock & Alarm (If Equipped) Inoperative; Power Sliding Door Open/Close Function Okay | 1 | ||||
| Keyless Entry System Completely Inoperative | 2 | ||||
| Remote Driver Door Unlock Mode Malfunction | 3 | ||||
| Power Sliding Door Is Inoperative Using Transmitter | 4 | ||||
| Remote Lock & Unlock Confirmation Modes Malfunction | 5 | ||||
| Cannot Change Feature Customization Modes | 6 | ||||
| One Door Does Not Lock When Using Transmitter | (1) | ||||
| One Door Does Not Unlock When Using Transmitter | (1) | ||||
| Power Sliding Doors Will Not Unlock Using Transmitter | (2) | ||||
|
|||||