lemon-mirror:
Home >> Chevrolet >> 2001 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Door Lock System & Remote Keyless Entry System >> Programming >> Transmitter Programming

Transmitter Programming

NOTE: Vehicle can be programmed for up to 4 RKE transmitters. If the number of RKE transmitters programmed exceeds 4, previously programmed RKE transmitters will be erased, starting with the first RKE transmitter. All RKE transmitters to be used must be programmed in same programming sequence.
  1. Connect a fused jumper (5-amp) between Data Link Connector (DLC) terminals No. 4 (Black wire) and No. 8 (Pink/White wire). Door locks will cycle once to indicate entering programming mode.
  2. Within one minute, repeatedly press LOCK and UNLOCK buttons on RKE transmitter simultaneously until door locks cycle once.
  3. Within 30 seconds, repeat step  2 for each additional RKE transmitter to be programmed.
  4. Disconnect fused jumper wire to exit programming mode.
· About lemon-mirror