Installation Procedure

Fig 1: Installing Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS CORP.

Install the remote control door lock receiver (2) to the mounting bracket (3). Secure the receiver with 2 screws (1).

Fig 2: Installing Remote Control Door Lock Receiver Connector Retainers

Courtesy of GENERAL MOTORS CORP.

Connect the receiver electrical connector (3).
Install the 2 retainers (2,4) which secure the remote control door lock receiver electrical connector (3).

Fig 3: Installing Remote Control Door Lock Receiver Bracket

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE .

Reposition the receiver bracket (2) back to its original position. Secure the receiver bracket with the retaining nut (1).
Tighten: Tighten the remote control door lock receiver bracket nut to 10 N.m (89 lb in).
Reprogram the remote control door lock receiver. Refer to Transmitter Programming (Second Method) .