lemon-mirror:
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery >> Repair Instructions >> Ground Strap Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the strap and bolt to engine block.

    Tighten:  Tighten bolt to 50 N.m (37 lb ft).

  2. Lower the vehicle.
  3. Install the nut to retain strap to frame.

    Tighten:  Tighten nut to 25 N.m (18 lb ft).

  4. Close the hood.