lemon-mirror:
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Shock Module Yoke Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Shock Module Yoke To Shock Absorber Pinch Bolt & Nut
    GM744322Courtesy of GENERAL MOTORS CORP.
  1. Install the shock module yoke to the lower control arm stud and shock absorber.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the shock module yoke to shock absorber pinch bolt and nut.

    Tighten:  Tighten the shock module yoke to shock absorber pinch bolt to 70 N.m (52 lb ft).

    3. Fig 2: View Of Shock Module Yoke Lower Mounting Nut
    GM1277999Courtesy of GENERAL MOTORS CORP.
  3. Install the shock module yoke to lower control arm mounting nut.

    Tighten:  Tighten the shock module yoke to lower control arm mounting nut to 110 N.m (81 lb ft).

  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
· About lemon-mirror