lemon-mirror:
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Shift Lock Solenoid/Switch Assembly Replacement >> Installation Procedure

Installation Procedure

  1. Install the shift lock solenoid (2) to the manual selector.
    Fig 1: Installing Shift Lock Solenoid To Manual Selector
    G01407425Courtesy of GENERAL MOTORS CORP.
  2. Install the shift lock solenoid cover (2).
    Fig 2: Shift Lock Solenoid Electrical Connector
    G01407426Courtesy of GENERAL MOTORS CORP.
  3. Connect the shift indicator lamp electrical connector and the shift lock solenoid connector (3) under the carpet.
  4. Install the shift indicator lamp (1).
  5. Install the console box to the floor.
    Fig 3: Console Box Screws & Retaining Clips
    G01407427Courtesy of GENERAL MOTORS CORP.
  6. Secure the console box with the 2 plastic retaining clips (2,5) and the 4 screws (1,6,3,4).
  7. Connect the negative battery cable.
· About lemon-mirror