lemon-mirror:
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 8.1L (Introduction) >> Repair Instructions >> Throttle Actuator Control (TAC) Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Position Assurance (CPA) Retainer
    GM858196Courtesy of GENERAL MOTORS CORP.
  1. Remove the connector position assurance (CPA) retainer (1).
  2. Disconnect the instrument panel (I/P) wiring harness electrical connector (2).
    3. Fig 2: View Of TAC Module Electrical Connector
    GM871922Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the engine wiring harness electrical connector (1).
    4. Fig 3: Throttle Actuator Control (TAC) Module Nuts
    GM855736Courtesy of GENERAL MOTORS CORP.
  4. Remove the throttle actuator control (TAC) module nuts.
  5. Remove the TAC module.
· About lemon-mirror