Disc Brake Component Specifications

WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Front Brakes
Brake Rotor Diameter	296.00 mm	11.653 in
Brake Rotor Discard Thickness*	23.0 mm	0.906 in
Brake Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Brake Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Brake Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Brake Rotor Minimum Allowable Thickness After Refinish	23.5 mm	0.925 in
Brake Rotor Thickness - New	26.0 mm	1.023 in
Rear Brakes
Brake Rotor Diameter	2780.0 mm	10.945 in
Brake Rotor Discard Thickness*	10.0 mm	0.394 in
Brake Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Brake Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Brake Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Brake Rotor Minimum Allowable Thickness After Refinish	10.5 mm	0.413 in
Brake Rotor Thickness - New	11.8 mm	0.465 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness after refinish specification.