lemon-mirror:
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 8.1L - Introduction >> Repair Instructions >> Filler Tube Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Ground Wire & Fill Pipe Ground Strap
    GM1224385Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear fuel tank. Refer to Fuel Tank Replacement (Front Tank)  or Fuel Tank Replacement (Rear Tank) .
  2. Remove the ground wire harness bolt.
  3. Reposition the ground wire and fill pipe ground strap.
    4. Fig 2: View Of Rear Axle Vent Hose & Clip
    GM1238176Courtesy of GENERAL MOTORS CORP.
  4. Open the rear axle vent hose clip at the fill pipe and remove the vent hose.
    5. Fig 3: View Of Fuel Fill Hose
    GM1224382Courtesy of GENERAL MOTORS CORP.
  5. Loosen the fuel tank fill hose clamp at the front tank.
  6. Disconnect the fuel fill hose vent line quick connect fitting from the tank. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  7. Remove the fill hose from the front tank.
  8. Remove the fuel fill hose/pipe assembly.
  9. Cap the open end of the front fuel tank to prevent system contamination.
· About lemon-mirror