lemon-mirror:
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Computer/Integrating Systems) >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to BATTERY DISCONNECT CAUTION in Cautions and Notices.
  1. Disconnect the negative battery cables.
    2. Fig 1: Knee Bolster & Bolts
    GM348714Courtesy of GENERAL MOTORS CORP.
  2. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
    3. Fig 2: Harness Connectors
    GM387553Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the brown connector.
  4. Disconnect all other connectors (1).
  5. Remove the body control module (BCM) from the sliding bracket.
· About lemon-mirror