lemon-mirror:
Home >> Chevrolet >> 2005 >> Equinox LS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement - Primary >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Level Sensor (Primary)
    GM1226418Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sender unit and float onto the fuel pump module. Make sure that the sender cap snaps into place (1, 2).
  2. Connect the fuel level sender unit and float electrical connector.
  3. Install the fuel pump module into the fuel tank. Refer to Fuel Tank Module Replacement - Primary .
  4. Install the fuel tank. Refer to Fuel Tank Replacement (FWD)  or Fuel Tank Replacement (AWD) .
· About lemon-mirror