lemon-mirror:
Home >> Chevrolet >> 2005 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 945 (Hybrid Engine Control System) >> Repair Instructions >> Generator Control Module Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Generator Control Module Cover
    GM1891201Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Grasp the generator control module cover by the left side and lift up in order to disengage the cover from the ball studs.
  3. Remove the generator control module cover tab from the battery tray slot.
  4. Remove the generator control module cover (1).
· About lemon-mirror