lemon-mirror:
Home >> Chevrolet >> 2005 >> Impala LS >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Rear Toe Adjustment

Rear Toe Adjustment

    Fig 1: View Of Jam Nut At Rear Wheel Spindle Rod
    GM518696Courtesy of GENERAL MOTORS CORP.
  1. Loosen the hex nuts at the rear wheel spindle rod - rear.
    2. Fig 2: View Of Rear Toe Adjustment
    GM518698Courtesy of GENERAL MOTORS CORP.
  2. Turn the adjusting nut to change the toe angle.
  3. Adjust the toe to the proper setting. Refer to Wheel Alignment Specifications .
    4. Fig 3: View Of Jam Nut At Rear Wheel Spindle Rod
    GM518696Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Tighten the hex nuts on the rear wheel spindle rod - rear.

    Tighten:  Tighten the rear wheel spindle rod ends hex nuts to 50 N.m (37 lb ft).

· About lemon-mirror