lemon-mirror:
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View of Engine Sight Shield
    GM1231427Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine sight shield and mounting bracket. Refer to Engine Sight Shield Replacement in Engine Mechanical - 6.0L.
    2. Fig 2: Removing/Installing MAP Sensor & Seal
    GM1491729Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connector (1).
  3. Remove the retaining clip (2) for the manifold absolute pressure (MAP) (3) sensor.
  4. Remove the MAP sensor (3) and seal (4) from the intake manifold (5).
· About lemon-mirror