lemon-mirror:
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Electrical Connectors
    GM440108Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the BCM.
    2. Fig 2: View Of Body Control Module
    GM440103Courtesy of GENERAL MOTORS CORP.
  2. Align the tabs on the BCM with the slots in the mounting bracket. Push the BCM up until the module clicks into place.
  3. Install the right side I/P insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  5. Setup the BCM customized options.
· About lemon-mirror