lemon-mirror:
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L - Introduction >> Repair Instructions >> Fuel Strainer Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Pump & Sender Assembly Component View
    GM50636Courtesy of GENERAL MOTORS CORP.
  1. Install the new strainer (4) to the reservoir.
  2. Support the reservoir with one hand and grasp the strainer with the other hand twisting the strainer into position.
  3. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  4. Inspect for fuel leaks using the following procedure:
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
· About lemon-mirror