lemon-mirror:
Home >> Chevrolet >> 2005 >> Venture LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 414 (Keyless Entry System) >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Connecting Electrical Connector To Door Lock Receiver
G01813495Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the door lock receiver.
  2. Engage the retaining tabs in order to install the door lock receiver to the IP upper trim.
  3. Install the IP upper trim. Refer to TRIM PAD REPLACEMENT - IP UPPER .
  4. Program transmitter to the new receiver. Refer to Transmitter Programming  .
· About lemon-mirror