lemon-mirror:
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to ENGINE ELECTRICAL .
  2. Remove the right side instrument panel (I/P) insulator.
    3. Fig 1: View Of Body Control Module
    GM440103Courtesy of GENERAL MOTORS CORP.
  3. Push the release tab on the bottom of the bracket to release the body control module (BCM).
  4. Slide the BCM from the bracket.
    5. Fig 2: View Of Electrical Connectors
    GM440108Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connectors.
· About lemon-mirror