lemon-mirror:
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Front Camber Adjustment >> Installation Procedure

Installation Procedure

  1. Install the strut to the vehicle. Refer to Strut, Strut Component and/or Spring Replacement .

    Tighten:  Tighten the strut-to-knuckle nuts as far as to allow movement of the knuckle.

    Fig 1: Adjusting Front Camber
    GM156937Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  3. Adjust the camber (1).

    Tighten:  Tighten the strut-to-knuckle nuts to 130 N.m (96 lb ft).

  4. Lower the vehicle.
· About lemon-mirror