Rear Toe Adjustment

Loosen the jam nuts at the rear wheel spindle rod - rear.

Fig 1: View Of Jam Nut At Rear Wheel Spindle Rod
Courtesy of GENERAL MOTORS CORP.
Turn the adjusting nut to change the toe angle.

Fig 2: View Of Rear Toe Adjustment
Courtesy of GENERAL MOTORS CORP.
Adjust the toe to the proper setting. Refer to Wheel Alignment Specifications .
Tighten the jam nuts on the rear wheel spindle rod - rear.
Tighten: Tighten the rear wheel spindle rod end jam nuts to 70 N.m (52 lb ft).

Fig 3: View Of Jam Nut At Rear Wheel Spindle Rod
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .