lemon-mirror:
Home >> Chevrolet >> 2008 >> Optra LS, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Installation Procedure

Installation Procedure

  1. Connect the electrical connections to the turn signal switch.
    2. Fig 1: View Of Turn Signal Switch
    GM1308111Courtesy of GENERAL MOTORS CORP.
  2. Install the turn signal switch by snapping it into the switch housing.
    3. NOTE: Refer to Fastener Notice .
    Fig 2: Identifying Steering Column Cover Panel Screws
    GM1308107Courtesy of GENERAL MOTORS CORP.
  3. Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.

    Tighten:  Tighten the upper and the lower steering column cover panel screws to 2.5 N.m (22 lb in)  .

  4. Connect the negative battery cable.
· About lemon-mirror